Calcium chloride · anhydrous
- Ingredient
Calcium chloride · anhydrous
- Form
CaCl₂; food-grade solid
- Role
Calcium source; firming
- Culinary use
External bath for direct alginate setting
- Preparation
Dissolve in bath water; match product form
- Handling
Moisture-absorbing solid
Identity and assay
Anhydrous CaCl₂ has a formula weight of 110.99 g/mol and a minimum JECFA assay of 93%. Apply the purchased product’s assay when calculating salt mass.
Calcium basis
Salt assay describes CaCl₂ content. Dissolved free-calcium activity requires a separate measurement or a suitable chemical model.
Direct setting
Dissolve calcium chloride in an external water bath, then rinse the set spheres in fresh water. The calcium chloride hydrate and assay are unspecified for the Kitchen Alchemy preparation; an anhydrous-product bath dose requires the actual product composition.
Sensory context
Rinsing reduces the bitterness Kitchen Alchemy attributes to calcium chloride. Concentration-dependent sensory thresholds and differences between hydration forms are unquantified for that preparation.
Calcium chloride · dihydrate
- Ingredient
Calcium chloride · dihydrate
- Form
CaCl₂·2H₂O; food-grade solid
- Role
Calcium source; firming
- Culinary use
Form-specific calcium accounting
- Preparation
Water-soluble; weigh the supplied form
- Handling
Confirm hydrate-equivalent assay
Identity and assay
Calcium chloride dihydrate has a formula weight of 147.02 g/mol and a JECFA assay range of 99.0–107.0% expressed as CaCl₂·2H₂O equivalent. An equivalent assay can exceed 100%; it is distinct from an as-sold water percentage.
Preparation
Calcium chloride dihydrate dissolves freely in water and is deliquescent: it absorbs atmospheric moisture. Use the supplier’s storage conditions and current assay.
Application boundary
A direct-spherification calcium bath holds the spheres before a fresh-water rinse. For the Kitchen Alchemy preparation, the calcium chloride hydrate is unspecified; a dihydrate-specific bath amount requires the actual product and a validated recipe.
Calcium lactate gluconate
- Ingredient
Calcium lactate gluconate
- Form
Calcium lactate + gluconate mixture
- Culinary use
Reverse spherification: calcium in the filling
- Preparation
Mix into filling; alginate in the bath
- Handling
Obtain blend calcium and water data
Mixture identity
Jungbunzlauer’s calcium lactate gluconate combines calcium lactate and calcium gluconate. Its blend ratio and numeric calcium assay are unspecified. Commercial mixtures require their own composition data.
Yogurt example
For Penn College’s yogurt spheres, combine 4 g calcium lactate gluconate with 200 g yogurt. Make a separate bath with 7.5 g sodium alginate and 1,500 g distilled water. Blend the bath for 5–10 minutes, rest it to release air, hold the yogurt portion in the bath for up to two minutes, and rinse it in water.
Amount basis
For the yogurt preparation, 4 ÷ 200 × 100 = 2.0% relative to yogurt; 4 ÷ 204 × 100 ≈ 1.96% of the combined filling. The teaching-recipe ratios use an unspecified commercial blend and assay.
Taste and transfer
Jungbunzlauer describes its product as neutral tasting. Sensory-panel and comparator results are unavailable for the yogurt preparation. Other liquids and commercial blends require their own dissolution and setting checks.
Trisodium citrate · anhydrous
- Ingredient
Trisodium citrate · anhydrous
- Role
Buffer; calcium sequestrant
- Culinary use
Calcium and protein management in processed cheese
- Preparation
Water-soluble; measure final food pH
- Handling
Keep assay and hydration basis explicit
Identity and assay
Anhydrous trisodium citrate has a formula weight of 258.07 g/mol. Its JECFA assay minimum is 99.0% on a dried basis, with an anhydrous loss-on-drying limit of 1% at 180 °C to constant weight.
Function
Citrate binds calcium and can alter casein dispersion in processed cheese. Casein supplies the protein film around fat droplets. Cheese composition, pH, heat and shear govern texture; calcium binding alone cannot predict melt.
pH and preparation
Trisodium citrate buffers pH, sequesters calcium and dissolves freely in water. Establish the final pH in the actual food after mixing; a fixed citrate addition supplies no universal pH endpoint.
Application scope
Calcium and protein fraction measurements in Gouda-based processed cheese apply to the tested cheese at controlled pH. A general cheese-sauce dose and performance equivalence between anhydrous and dihydrate forms require separate testing.
Trisodium citrate · dihydrate
- Ingredient
Trisodium citrate · dihydrate
- Culinary use
Citrate supply with crystal water
- Preparation
Dissolve in water; check final pH
- Handling
Store sealed, cool and dry
Product basis
Cargill’s trisodium citrate dihydrate has a formula weight of 294.10 g/mol, assay ≥99.0% on an anhydrous basis and water 10.0–13.0%. Treat the assay and water figures as supplier typical guidance, with specification status unresolved. Confirm current product data before formulation.
Hydration arithmetic
For ideal pure forms, 258.07 ÷ 294.10 ≈ 0.8775 g anhydrous citrate equivalent per gram of dihydrate. The ideal anhydrous-equivalent ratio requires separate correction for the actual assay and water basis; it establishes neither sensory nor processing equivalence.
Storage and taste
Store Cargill’s trisodium citrate dihydrate in sealed containers at low temperature and humidity to limit caking. Cargill describes a slight saline taste; a finished-dish sensory threshold is unspecified.
Culinary pH control
In direct alginate work, check the food’s pH after citrate addition and observe setting in the actual calcium bath. Citrate’s buffering and calcium-binding effects act within the same mixture; pH alone cannot establish available calcium.
Disodium hydrogen orthophosphate · anhydrous
- Ingredient
Disodium hydrogen orthophosphate · anhydrous
- Form
Na₂HPO₄; named food grade
- Role
pH buffer; dairy stabilizer
- Culinary use
Processed cheese and condensed milk; supplier-listed uses
- Preparation
Follow the selected product/process method
- Handling
Keep orthophosphate and pyrophosphate distinct
Product and assay
Innophos Disodium Phosphate Anhydrous (Food) has unspecified numeric assay and water limits. Obtain the product’s assay and water specification for a mass-based formulation.
Application
Innophos names processed cheese, condensed milk and instant pudding as applications for its anhydrous disodium phosphate. Dose and processing conditions require the chosen product and food.
Cheese measurements
Disodium phosphate, disodium pyrophosphate, hexametaphosphate and trisodium citrate underwent separate tests in processed cheese. Measured calcium and protein fractions apply to the tested cheese and extraction procedure; general sauce performance and free-calcium values require separate measurements.
Form control
Calculate anhydrous Na₂HPO₄ and hydrated commercial grades using their respective formula masses and assays.
Tetrasodium pyrophosphate · AAKO Food powder
- Ingredient
Tetrasodium pyrophosphate · AAKO Food powder
- Form
Na₄P₂O₇; hydrate not expressly named
- Role
Sequestration; buffering
- Culinary use
Specialized processed-cheese formulation
- Preparation
Product-specific incorporation required
- Handling
Keep dry; confirm current product data
Identity
AAKO tetrasodium pyrophosphate, also called tetrasodium diphosphate, has CAS 7722-88-5 and formula Na₄P₂O₇. Its hydrate is unspecified; confirm the supplied form before a hydrate-sensitive calculation.
Supplier data
AAKO’s typical properties dated 10 February 2026 are Na₄P₂O₇ content ≥96.0%, P₂O₅ content 53.3 ± 0.5%, and pH 10.0–10.6 for a 1% solution. The solution’s percentage convention and the assay method are unspecified. Typical properties leave measured lot composition and finished-food pH to separate determination.
Handling and application
AAKO describes sequestration, buffering and emulsifying functions for its tetrasodium pyrophosphate. Keep the product cool, ventilated and protected from moisture. A kitchen dissolution protocol and dairy dose require product-specific testing.
Processed-cheese measurements
TSPP concentration affected meltability in pasteurized process Cheddar at controlled pH: meltability fell, then rose as concentration increased across the experimental range. The non-monotonic response applies to those processing conditions; equivalence between the AAKO product and the tested material is unverified.
Chemical distinction
Tetrasodium pyrophosphate and sodium acid pyrophosphate have different sodium and hydrogen stoichiometry. Select the exact salt and grade in a product-specific formula; a generic pyrophosphate label leaves that identity unresolved.