Sucrose
- Solids
Dry crystals; check moisture
- Use
Sweetening; bulk; texture
- Handling
Choose crystal size for the process
Identity
Granulated and caster are particle grades of refined crystalline sucrose, sharing the same sweetening substance.
Sweetness basis
Sucrose = 100 sets the aqueous sweetness reference. It expresses comparative sweetness; 100% sugar expresses composition, DE describes a separate property, and substitution requires its own basis. Concentration, temperature and viscosity affect comparisons.
Working with it
Crystal size can affect dissolution, creaming and finished texture. Match the granulated or caster grade to the process; equivalent performance requires a direct comparison.
Specification
Use the purchased grade’s assay and moisture specification when balancing solids.
Supplier composition
Cargill granulated sugar has a specified sucrose minimum of 99.85% and representative moisture of 0.035%. The moisture figure is typical, with method and basis unstated; moisture for nutrition labeling is non-detectable. Use a lot assay for an exact water balance. A caster grade needs its own specification.
POD and PAC conventions
The sucrose sweetness reference of 100 anchors the aqueous comparison. A separately chosen sucrose-relative PAC index can also set sucrose to 100 by definition. Keep the scales independent from each other and from measured freezing point or finished-dessert sweetness.
Icing sugar
- Solids
Cargill example: moisture ≤0.50%
- Use
Icing; frosting; dusting
- Handling
Check starch and fineness
Grade example
Cargill mills cane sugar to make its 10X/12X product and blends it with cornstarch. Representative sucrose >95% and moisture ≤0.50% apply to this product.
Function
Fine dispersion suits dusting, icing, fondants and buttercreams. Added starch can affect opacity, hydration and texture.
Substitution
Account for both sucrose and starch when replacing pure sucrose at equal product mass. Relative sweetness requires sensory measurement; sugar assay and fineness describe composition and physical form.
Preparation
Use the recipe and actual additive specification to set dissolution conditions and starch heating for the selected product.
Component accounting
Cargill icing sugar contains cornstarch at an unspecified percentage. Sucrose >95% and moisture ≤0.50% are representative limits with incomplete analytical-basis information; subtracting independent limits cannot establish starch content. Nutrition-label composition is 96.8 g sugars and 0.32 g moisture per 100 g, distinct from the technical limits.
POD and freezing data
Product-specific POD, sensory conditions and measured freezing data are unavailable. The sucrose–starch blend needs a complete composition and a declared model before a modeled PAC can describe the powder.
Liquid sucrose
- Form
Cargill 67.5°Bx solution
- Solids
67.5% sugars; 32.5% water
- Use
Pre-dissolved sweetness
- Handling
Rebalance water and sugar solids
Composition basis
Cargill liquid sucrose contains a declared 67.5 g sugars and 32.5 g moisture per 100 g as sold. Composition and Brix describe separate properties.
Formula balance
At the stated composition, 148.15 g liquid contains 100 g sugar and introduces 48.15 g water. Balancing sugar and water by mass requires separate evaluation of sweetness, viscosity and recipe performance.
Handling
Liquid sucrose supplies sugar already in solution. Cargill recommends 70–100°F (21.1–37.8°C) for storage; choose mixing conditions for the recipe.
Sweetness
Multiplying the sucrose reference of 100 by 0.675 describes solids. An as-sold sensory value requires a sweetness measurement.
Brix and invert content
Cargill liquid sucrose has specified limits of 67.5 ± 0.3°Bx and invert sugar at most 0.30% on a dry basis. Nutrition-label composition is 67.5 g sugars and 32.5 g moisture per 100 g for mass accounting. The Brix reference temperature and analytical methods are unspecified.
Calculation eligibility
For m grams of Cargill liquid sucrose, declared sugars = 0.675 × m and declared moisture = 0.325 × m. A product-specific POD or measured PAC is unavailable; the sugar-and-water mass balance establishes neither sensory nor freezing equivalence.
Dextrose, anhydrous
- Ingredient
Dextrose, anhydrous
- Form
Crystalline D-glucose
- Solids
≥98% total solids · U.S. standard
- Use
Sweetening; fermentable bulk
- Handling
Keep distinct from monohydrate
Form and solids
Anhydrous dextrose contains no water of crystallization. The U.S. identity standard requires at least 98% total solids; use the purchased lot’s assay for its actual composition.
Sweetness basis
The 70–80 sweetness range applies to Cargill dextrose monohydrate. An anhydrous comparison needs its own matched sensory protocol and as-sold mass basis.
Function
Dextrose provides glucose sweetness, bulk and fermentable sugar. Confirm food grade, assay, free moisture and particle size for the intended process.
Substitution
Dextrose and dried glucose syrup have distinct compositions. DE and the sucrose sweetness reference measure separate properties; freezing predictions and mixing temperatures require grade- and formula-specific data.
Assay basis
Anhydrous dextrose has a 98% total-solids minimum and the same dry-basis reducing-sugar requirement as monohydrate. Express the reducing-sugar assay as D-glucose. The actual food-grade lot’s glucose, water and impurity fractions require separate measurements.
POD and freezing data
A matched, grade-specific sensory coefficient and measured freezing curve are unavailable for anhydrous dextrose. An ideal dissolved-molecule calculation would require actual purity, water mass and complete dissolution, with its result labeled as a model. Monohydrate sweetness cannot establish an anhydrous coefficient.
Dextrose, monohydrate
- Ingredient
Dextrose, monohydrate
- Form
D-glucose · crystal water
- Sweetness
70–80 · basis unstated
- Solids
≥90% total solids · U.S. standard
- Use
Sweetening; fermentable bulk
- Handling
Crystal water changes mass balance
Form and solids
Each glucose molecule has one molecule of water of crystallization. The U.S. identity standard requires at least 90% total solids and at least 99.5% reducing sugar as D-glucose on a dry basis.
Sweetness basis
Cargill assigns relative sweetness of 70–80 to its dextrose mono product, with concentration, temperature and the equal-as-sold-mass basis unstated. Formula conversion requires those conditions.
Crystal water
Formula-mass calculation gives ideal glucose monohydrate 9.09% crystal water. Measure free moisture and commercial lot composition separately.
Working with it
Confirm hydration form and actual solids before replacing anhydrous dextrose. Set crystal-water treatment and mixing temperature for the grade and recipe.
Water accounting
For ideal pure monohydrate, crystal water contributes about 9.09 g per 100 g ingredient. The lot’s total-solids test and dry-basis assay describe separate quantities. Count crystal water once in the dissolved formula, and use the test’s definition before allocating additional free moisture.
POD and freezing data
Cargill’s 70–80 dextrose-monohydrate sweetness range has an unspecified sensory protocol, concentration, temperature and mass-versus-molar basis. A formulation POD and measured PAC are unavailable. A model must preserve monohydrate identity and include the water entering with the crystal.
Glucose syrup, 40 DE
- Ingredient
Glucose syrup, 40 DE
- Form
Liquid · GLOBE tapioca
- Sweetness
Moderate · supplier description
- Solids
79.0–81.5% dry substance
- Use
Caramels; fudge; soft chews
- Handling
DE 38–42; match sugar profile
Named grade
Ingredion makes GLOBE 40 DE Glucose Syrup NON-GMO 014423 (01440303) from tapioca; the specified grade dates from 12 March 2024.
Composition
Dry substance spans 79.0–81.5% by mass. The typical dry-basis profile contains dextrose 16%, maltose 12%, maltotriose 16% and higher saccharides 56%; consult the lot data for actual fractions.
Sweetness and use
Ingredion describes moderate sweetness and recommends caramel, fudge, soft-chew, fruit and bakery applications. A numerical sucrose=100 comparison requires a matched sensory test.
Handling
Ingredion recommends 49–60°C (120–140°F) for storage and handling. Set recipe mixing conditions separately and compare DE alongside solids and the saccharide profile.
As-sold mass balance
The 79.0–81.5% dry-substance limits give a calculated water range of 18.5–21.0 g per 100 g syrup: water = 100 − dry substance. At an illustrative 80% dry substance, the typical profile gives 12.8 g dextrose, 9.6 g maltose, 12.8 g maltotriose and 44.8 g higher saccharides per 100 g syrup. Combining an assumed solids point with a typical profile gives a conditional calculation, separate from a lot assay.
POD, PAC and Brix
GLOBE sweetness has only a qualitative manufacturer description; a numeric POD, measured PAC and Brix method are unavailable. The DP4+ aggregate leaves the higher-saccharide molecular distribution unresolved. DE 38–42 alone cannot specify that distribution or a freezing coefficient.
High-maltose syrup
- Ingredient
High-maltose syrup
- Form
Liquid · ENZOSE 42 HM
- Solids
79.5–81.5% dry substance
- Use
Bulk; defined maltose-rich profile
- Handling
42% maltose · typical dry basis
Named grade
Enzymatic conversion produces ENZOSE 42 HM Corn Syrup/Glucose 014420, a liquid corn syrup with a grade specification effective 29 April 2025.
Composition
DE spans 43–47. The typical dry-basis profile contains dextrose 7%, maltose 42%, maltotriose 16% and higher saccharides 35%. This mixture has a distinct composition from pure maltose and other high-maltose products.
Comparison
Its maltose profile differs materially from GLOBE 40 DE despite nearby DE ranges. Compare the saccharide profiles and recipe-specific sweetness, crystallization and freezing performance alongside DE.
Handling
Ingredion recommends 49–54°C (120–130°F) for bulk handling/storage. Set culinary incorporation conditions for the intended formula.
As-sold mass balance
Water = 100 − dry substance gives 18.5–20.5 g water per 100 g syrup. At an illustrative 80% dry substance, the typical profile gives 5.6 g dextrose, 33.6 g maltose, 12.8 g maltotriose and 28.0 g higher saccharides. Combining an assumed solids point with a typical profile gives a conditional calculation, separate from a lot assay.
POD, PAC and grade name
The 42 in ENZOSE 42 HM belongs to the product name; its DE specification is 43–47. Product-specific POD and measured PAC are unavailable. A component freezing model needs the unresolved DP4+ distribution along with actual solids and water.
Glucose syrup solids, 42 DE
- Ingredient
Glucose syrup solids, 42 DE
- Form
Powder · GLOBE 019420
- Sweetness
Moderate · supplier description
- Solids
Moisture ≤4.5% · named grade
- Use
Bulk; crystallization control
- Handling
DE 41–46; starch-hydrolysate mixture
Named grade
GLOBE 42 DE Corn Syrup/Glucose Solids 019420 is a dried starch-hydrolysate mixture, distinct from crystalline glucose, with a grade specification effective 29 April 2025. Ingredion describes its sweetness as moderate; a measured sucrose=100 score requires sensory testing.
Solids basis
The named grade has a specified moisture maximum of 4.5% by mass. Subtraction gives at least 95.5% dry matter as the calculated complement; a separate assay gives measured dry matter.
Function
Ingredion recommends the powder for bulk and crystallization control in applications requiring a dry ingredient.
Reconstitution
Choose the target solids and saccharide profile before replacing a liquid syrup. A 33% solution is an analytical test preparation. Kitchen dissolution methods and freezing values require formulation-specific data.
Dry-basis profile
Ingredion’s typical dry-basis profile is dextrose 14%, maltose 26%, maltotriose 12% and higher saccharides (DP4+) 48%. At the 4.5% moisture ceiling, 100 g powder contains at least 95.5 g calculated dry matter. Applying the typical profile at that boundary gives 13.37, 24.83, 11.46 and 45.84 g respectively; those calculated amounts describe an assumed boundary composition.
POD and PAC inputs
A numeric POD, sensory test conditions and measured PAC are unavailable for 019420. The higher-saccharide aggregate lacks the individual molecular distribution needed for a component model. Record the 33% w/w solution as a color-test condition; select recipe concentration through a separate mass balance.
Glucose syrup solids, 24 DE
- Ingredient
Glucose syrup solids, 24 DE
- Form
Powder · GLOBE 019240
- Solids
Moisture ≤4.0% · named grade
- Use
Bulk; crystallization control
- Handling
DE 22–26; keep separate from 42 DE
Named grade
GLOBE 24 DE Corn Syrup/Glucose Solids 019240 is a distinct low-DE dried syrup grade with a specification effective 29 April 2025.
Composition
Moisture reaches at most 4.0% by mass; subtraction gives at least 96.0% dry matter as the calculated complement. Higher saccharides (DP4+) typically make up 75% of dry substance.
Function
Ingredion recommends the powder for bulk and crystallization control. A measured sweetness value or freezing coefficient requires data beyond the lower DE.
Working with it
Match the intended body, target solids and carbohydrate profile. Select a mixing protocol for this grade; 42 DE powder and dextrose have their own specifications, even when suppliers call each a glucose powder.
Dry-basis profile
Ingredion’s typical dry-basis profile is dextrose 2%, maltose 10%, maltotriose 13% and higher saccharides (DP4+) 75%. At the 4% moisture ceiling, 100 g powder gives 96 g calculated dry matter. Applying that typical profile gives 1.92, 9.60, 12.48 and 72.00 g respectively, as a conditional boundary calculation.
POD and PAC inputs
Product-specific POD and measured PAC are unavailable. DP4+ denotes an aggregate of longer saccharides; its unresolved distribution prevents a fully specified component freezing model. Keep the 22–26 DE range separate from solids, Brix and sensory sweetness.
Crystalline fructose
- Ingredient
Crystalline fructose
- Form
Crystals · KRYSTAR 450
- Sweetness
117 · supplier index, protocol unstated
- Solids
Moisture ≤0.06% · named grade
- Use
Sweetening with dry fructose
- Handling
Hygroscopic; protect from moisture
Named grade
KRYSTAR 450, specification version 1.5, changed 26 September 2016 and printed 25 September 2017, has specified fructose of at least 99.50% and moisture of at most 0.06%. Confirm the purchased grade’s current specification.
Sweetness basis
Tate & Lyle assigns KRYSTAR crystalline fructose a sweetness index of 117 against sucrose = 100, with sensory protocol unstated. Finished-food comparisons and fructose conversion require matched sensory data.
Handling
Crystalline fructose is hygroscopic and needs moisture control. Tate & Lyle recommends storage at or below 25°C (77°F) and below 50% relative humidity. Choose dissolution conditions for the formula.
Frozen formulas
Ideal molecular-count calculations describe molecular amount. Evaluate sweetness, water control and freezing behavior in the actual formula to establish a food freezing factor.
Sweetness test conditions
Tate & Lyle’s 2017 KRYSTAR sweetness index of 117 applies to 10% sweetener dry solids in water at room temperature, with sucrose = 100. Panel protocol, exact temperature and whether the percentage denominator is mass or volume are unspecified. Separate particle-grade sensory measurements are unavailable.
Calculation eligibility
The named grade’s assay and moisture limits support conditional solids accounting. A finished-dessert POD, measured freezing curve and grade-specific PAC are unavailable. Keep the aqueous supplier index separate from an as-sold coefficient and from an ideal molecular model.
Invert syrup
- Form
Castle Malting/Belgosuc 70%
- Solids
69.5–70.5% total solids
- Use
Liquid glucose–fructose sweetening
- Handling
Match solids and residual sucrose
Named grade
Castle Malting/Belgosuc Invert Sugar 70% is hydrolyzed sucrose in an aqueous syrup, with grade specification revision 5 dated 19 June 2013. Confirm the purchased product’s current specification.
Composition basis
Total solids span 69.5–70.5% w/w at 20°C (68°F); subtraction gives calculated water of 29.5–30.5%. The average dry-substance profile contains 47% fructose, 50% glucose and 3% sucrose.
Separate measures
Brix of 68–69 and total solids describe separate measurements. Verify DE and exact inversion percentage independently of the product name.
Working with it
The aqueous syrup introduces water along with its sugar mixture. Account for both, and use formula-specific data for comparative sweetness, a freezing coefficient and mixing temperature.
Component balance
At an illustrative 70% total solids, 100 g syrup gives 35.0 g glucose, 32.9 g fructose, 2.1 g sucrose and 30.0 g calculated water. Component mass = syrup mass × solids fraction × dry-basis component fraction. Combining the supplier’s average profile with the selected solids midpoint gives a planning calculation, separate from measured lot composition.
Methods and freezing data
The Brix and total-solids measurements at 20°C use BSCH011; average sugar composition uses BSCH036–081. The analytical steps for measuring Brix, solids and sugar composition are unspecified. Product-specific POD and measured PAC are unavailable; preserve residual sucrose in any separately declared composition model.
Honey
- Form
Liquid or crystallized
- Sweetness
Varies with botanical origin and conditions
- Solids
Water ≤20%; heather ≤23% · Codex
- Use
Sweetness and botanical flavor
- Handling
Match botanical origin and crystallization state
Scope
Honey for direct consumption has Codex Part One moisture ceilings of 20% generally and 23% for Calluna heather honey. Use a lot measurement for actual composition within those category limits.
Composition and flavor
Honey contains mainly fructose and glucose, with other constituents. Plant origin affects flavor; physical form can range from fluid to crystallized.
Working with it
Use actual moisture and botanical origin when balancing the formula. Sweetness and warming conditions depend on the honey; category moisture ceilings do not determine each lot’s water content.
Composition for calculation
Use a botanical identity and lot moisture measurement together with the lot’s glucose, fructose and other-sugar profile. Codex moisture ceilings constrain category identity; actual batch water and sugar distribution require measurement. Sample the whole ingredient, accounting for its liquid or crystallized state.
POD and freezing data
A generic honey POD or PAC is unavailable. A measured result needs the identified honey, concentration, matrix, temperature and method. Glass-transition measurements describe a different thermal property from equilibrium freezing-point depression.
Agave syrup
- Form
Liquid · product-dependent
- Solids
Check product solids and water
- Handling
Match species and carbohydrate profile
Scope
Agave syrup composition varies with plant source and processing. Compare the commercial product’s specification within this syrup family.
Solids
Agave syrup commonly exceeds 70°Bx, with concentration varying by product. Obtain the product’s solids specification and separate water assay.
Working with it
Agave syrup contains a variable sugar mixture and concentration. Obtain the actual carbohydrate profile and solids before replacement, and establish sweetness, freezing and incorporation conditions for the product and formula.
Product and method basis
A named agave product needs its own moisture assay and individual carbohydrate profile. Keep refractometric Brix, measured moisture and chromatographic sugar fractions as separate quantities. A Brix range alone leaves the component calculation unresolved.
POD and freezing data
Product-specific POD and measured PAC are unavailable. Plant species, hydrolysis process and residual carbohydrate fractions define the material; a component freezing calculation requires individual quantities beyond the broad fructose-rich composition.
Maple syrup
- Solids
66.0–68.9% soluble solids · grade
- Use
Sweetness and maple flavor
- Handling
Choose the color/flavor class
Grade basis
U.S. Grade A maple syrup has a soluble-solids interval of 66.0–68.9% by weight (Brix). Sucrose assay and sensory sweetness require separate measurements.
Flavor choice
Grade A color/flavor classes run from Golden/Delicate through Amber/Rich and Dark/Robust to Very Dark/Strong. Choose the class for the intended maple flavor.
Working with it
Choose pure maple syrup and account for its actual solids and water; maple-flavored table syrup has a different formulation. The USDA grade refractometer reference temperature is 20°C (68°F). Set recipe mixing temperatures separately.
Mass-balance boundary
The Grade A Brix interval sets a soluble-solids specification. Actual lot water and sucrose/glucose/fructose fractions need their own measurements. A Brix reading alone supplies neither a sucrose assay nor a fully resolved molecular composition.
POD and freezing data
A Grade A color class describes color and flavor. Grade-specific POD, sensory conditions and measured PAC are unavailable; retain the actual syrup’s composition and method with any formulation model.
Soft brown sugar
- Ingredient
Soft brown sugar
- Form
Soft crystals · light/dark
- Solids
Moisture and molasses vary
- Use
Molasses flavor; moisture retention
- Handling
Keep sealed; match light or dark
Scope
Light and dark soft brown sugars offer different molasses contributions, with dark usually stronger. Determine actual composition for the selected grade.
Composition
Approximate molasses additions are 3.5% for light and 6.5% for dark brown sugar. Actual specifications and solids/water assays depend on the product.
Use and handling
Molasses flavor and moisture retention support uses in baking, sauces and glazes. Exposure to air can harden the sugar.
Substitution
Confirm actual moisture, sugar profile and particle size when switching grades. A controlled sucrose=100 comparison and dissolution temperature require product- and process-specific support.
Separate light and dark limits
Light and dark brown sugar conforming to USDA procurement specification A-A-20135E (3 June 2015) have specified sucrose ≥86.0% and moisture ≤4.50%. The ash ceilings are 2.25% for light and 3.25% for dark. Actual retail-lot composition requires separate measurements.
Calculation eligibility
Independent specification limits leave the glucose, fructose and other molasses constituents unresolved. Use actual lot moisture and the sugar profile for mass accounting. Product-specific POD and measured PAC are unavailable for either light or dark grade.
Muscovado
- Form
Moist cane crystals · light/dark
- Solids
Retained molasses; check moisture
- Use
Toffee/molasses flavor; color
- Handling
Distinct from soft brown sugar
Identity
Ragus muscovado is partially refined cane sugar retaining natural molasses. Supplier naming varies, so check the product’s identity and composition alongside its color.
Flavor and use
Ragus describes a stronger molasses contribution for dark muscovado and softer toffee notes for light, with uses in baking, glazes and sauces.
Specification
Ragus characterizes muscovado texture and flavor qualitatively. Confirm numeric moisture and matched sweetness data when comparing muscovado with soft brown sugar.
Handling
Choose the intended light/dark grade and confirm moisture and grain size. Set dissolution time and mixing temperature for the product and recipe.
Light and dark composition
Keep the selected light or dark identity with its supplier. Quantitative moisture, sugar fractions and ash for Ragus muscovado are unavailable for a formula balance; the molasses and flavor differences between grades are qualitative.
POD and freezing data
Grade-specific POD and measured PAC are unavailable. A soft-brown-sugar composition cannot establish muscovado composition; obtain the named muscovado grade’s water and sugar profile before calculation.
Cane molasses
- Form
Liquid · specify grade
- Sweetness
Grade describes flavor and color
- Solids
Check sugars, water and ash
- Use
Molasses flavor and color
- Handling
Keep blackstrap and beet products distinct
Scope
Food-grade sugarcane molasses includes USDA A/Fancy, B/Choice and C/Standard grades. Their criteria describe flavor and color; sweetness needs separate measurement.
Composition
Numerical grade thresholds require verified grade criteria. Determine sugar composition and water content from product-specific analysis; generic Brix readings and grade names leave those quantities unresolved.
Working with it
Select the intended cane-molasses product and obtain its sugar profile, water, ash and sulfite information. Compare blackstrap, beet molasses and treacle through their own specifications.
Process
Establish the selected product’s viscosity curve and temperature/time method for the intended process.
Solids and ash accounting
A molasses formula balance needs measured water and separate sugar and non-sugar solids. Refractometric Brix and a food-grade designation leave those fractions unresolved. Australian food-grade identity alone does not establish a USDA grade.
POD and freezing data
A selected cane-molasses product needs its actual sucrose, reducing sugars, ash and water for a component model. Product-specific POD and measured PAC are unavailable. Keep sulfite information with the selected product’s specification.
Golden syrup
- Form
Liquid · Lyle’s N1000
- Solids
Sugars ≥80% w/w · named grade
- Use
Flavor; humectancy; texture
- Handling
Gentle warming can improve flow
Named grade
Tate & Lyle/Lyle’s Golden Cane Invert Syrup 50–83 is product N1000, with manufacturer specification revision 9.0 dated 9 January 2023.
Composition basis
Golden syrup has specified sugars of at least 80% by weight, with invert sugar 47.0–51.3% and sucrose 30.0–33.0% on the wet basis. A water assay is necessary to establish water content separately from 82.5–83°Bx.
Function
Tate & Lyle describes caramel/honey-like flavor, humectancy and texture in bars, puddings and cakes.
Handling
Gentle warming may aid flow; choose a warming temperature from grade-specific guidance. Excess heat can decompose the syrup. Other golden, cane or refiners syrups require their own specifications.
Specification limits
The sucrose and invert-sugar limits are independent bounds. Adding their endpoints cannot establish a simultaneous lot composition; the separate minimum total-sugar requirement also applies. Individual glucose and fructose quantities and actual water require measurements beyond aggregate sugars and refractometric solids.
POD and freezing data
A product-specific sensory coefficient and measured PAC are unavailable for N1000. A composition model needs the individual dissolved sugar fractions and actual water; retain the wet basis on each supplier sugar limit.
Lactose
- Form
Crystals · specify hydration
- Sweetness
20–40 · 30 g/L sucrose ref., 20°C
- Solids
Check hydration and moisture
- Use
Low-sweetness dairy solids; browning
- Handling
Watch supersaturation and crystallization
Sweetness basis
Lactose has comparative sweetness of 20–40 against a 30 g/L sucrose reference at 20°C (68°F). Different concentrations, temperatures and food matrices need separate sensory comparisons.
Form
Lactose comes in anhydrous, monohydrate and mixed crystalline forms. Use the commercial grade’s actual moisture specification.
Use
Lactose supplies dairy solids with comparatively modest sweetness and participates in Maillard browning. Crystallization can constrain concentration and texture.
Preparation
Lactose solubility of 100 g per 100 g water at 80°C applies to that temperature. Specify form, concentration and thermal history for the kitchen method, and use formula-specific data for a numerical freezing factor.
Hydration and dissolved fraction
Specify the lactose hydration form and the lot assay before assigning as-sold lactose and water. The soluble fraction in the unfrozen liquid governs a colligative calculation. Crystallized lactose contributes mass but requires separate treatment from dissolved solute.
POD and freezing data
Lactose sweetness depends on concentration and temperature. A finished-dessert POD or measured PAC is unavailable. A model needs actual water, lactose form, dissolved concentration and the temperature-dependent crystallization state.
Isomalt
- Form
Crystalline polyol · select grade
- Sweetness
45–65 · protocol unstated
- Solids
Check grade moisture
- Use
Hard candy; sugar work; bulk
- Handling
Low moisture uptake · supplier guidance
Sweetness basis
Isomalt’s comparative sweetness has an unspecified sensory protocol. A replacement ratio requires matched conditions.
Function
BENEO recommends isomalt for hard candy and sugar art and describes low moisture uptake. Confirm performance for the selected product and process.
Grade choice
BENEO offers grades differing in particle size, solubility and moisture. Select standard hard-candy material or grades for coating or chocolate according to the application.
Identity
Isomalt has a distinct identity from isomaltulose and maltose. Use grade-specific assay and cooking conditions, with a freezing coefficient established for the intended formula.
Grade composition
Isomalt contains glucosyl-sorbitol and glucosyl-mannitol components. A named grade needs its component ratio, hydration and moisture specification as well as particle size. Composition, hydration, moisture and particle size serve separate formulation purposes.
POD and freezing data
Isomalt has comparative sweetness of 45–65 with test conditions unstated. Grade-specific POD and measured PAC are unavailable; frozen-dessert coefficients require data for the intended formula.
Sorbitol, crystalline
- Ingredient
Sorbitol, crystalline
- Sweetness
50–70 · protocol unstated
- Solids
Check grade assay and moisture
- Handling
Powder and syrup need separate specifications
Sweetness basis
Sorbitol’s comparative sweetness has unspecified test conditions. Formula conversion requires matched conditions.
Form
Crystalline D-sorbitol (glucitol) and sorbitol syrup are separate formulation materials. The syrup needs its own solids and polyol profile.
Working with it
Confirm food grade, assay and moisture. Sorbitol dissolves in water; set concentration, time and temperature with product-specific data.
Formula basis
A comparison of about twice sucrose’s freezing effect requires an equivalence basis. Keep that unsupported factor out of formula calculations.
Analytical basis
Keep the actual crystalline grade’s water result separate from its assay on an anhydrous basis. An assay above 100% at the upper end of an analytical specification reflects the specification’s measurement convention; it cannot become a literal ingredient mass fraction above one.
POD and freezing data
In filtered water, modeled sorbitol sweetness potencies were 0.80, 0.72 and 0.83 against 5%, 10% and 15% w/v sucrose, respectively (sucrose = 1), from ratings by 40 adults using a general labelled magnitude scale. The serving temperature is unspecified. A matched recipe-mass POD and measured frozen-dessert PAC are unavailable; the sensory potencies apply to their individual sucrose concentrations.
Maltitol, crystalline
- Ingredient
Maltitol, crystalline
- Sweetness
90 · protocol unstated
- Solids
Check grade assay and moisture
- Handling
Distinct from maltitol syrup
Sweetness basis
Maltitol has comparative sweetness of 90 with test conditions unstated. A sucrose replacement ratio requires matched conditions.
Form
Keep crystalline maltitol separate from hydrogenated starch-hydrolysate syrup. A syrup’s water and higher-polyol fractions change the formulation.
Preparation
Maltitol solubility of 65% at 22°C has an unresolved denominator and method. Establish dissolution conditions for the selected grade and recipe before using that percentage as an operating limit.
Formula basis
Use actual grade assay and moisture. Evaluate freezing, viscosity and browning in the formula alongside sweetness and chemical identity.
Named-grade composition
Ingredion MALTISWEET CM100 263021, specification effective 7 March 2024, has assay limits of 92.0–100.5% maltitol on a dry basis and water ≤1.5%. Typical assay is ≥94% dry basis. At the water ceiling, subtraction gives 98.5 g dry matter per 100 g product as a calculated boundary, distinct from maltitol assay.
POD and freezing data
Ingredion assigns CM100 typical relative sweetness of 90% versus sucrose, with sensory protocol, matrix, concentration and temperature unstated. A formulation POD and measured PAC are unavailable. The analytical assay ceiling above 100% expresses a testing convention; mass accounting must preserve physical closure.
Maltitol syrup
- Form
Hydrogenated saccharide mixture
- Sweetness
25–50 · content varies; test unstated
- Solids
Water ≤31% · JECFA category limit
- Use
Sweetening; humectancy; texture
- Handling
Match solids and polyol profile
Sweetness basis
Maltitol-syrup sweetness varies with maltitol content. Specify composition and test conditions for a direct comparison.
Composition basis
Maltitol syrup contains mainly maltitol plus sorbitol and hydrogenated higher saccharides. JECFA category limits are at least 99% hydrogenated saccharides and at least 50% maltitol, both on an anhydrous basis; water is at most 31%.
Function
Maltitol syrup provides sweetening, humectancy, texture and bulk. The JECFA category has a 31% water ceiling; determine actual lot water from a lot-specific measurement.
Working with it
Confirm the actual syrup solids, maltitol/sorbitol/higher-polyol profile and viscosity. The mixture has a different composition from crystalline maltitol plus water; set cooking and freezing values for the grade and recipe.
Food-grade identity
Use a named food-grade syrup specification with actual solids, maltitol, sorbitol and hydrogenated higher-saccharide fractions. Pharmaceutical products have their own identities and nominal water contents; food-grade lot composition requires food-grade product measurements.
POD and freezing data
The category water maximum and dry-basis maltitol minimum establish limits. Product-specific POD and measured PAC are unavailable; the unresolved higher-polyol distribution prevents a fully specified component model.
Erythritol
- Sweetness
60–80 · protocol unstated
- Solids
Check grade purity and moisture
- Handling
Cooling sensation; crystallization can matter
Sweetness basis
Erythritol’s comparative sweetness has unspecified test conditions. A recipe ratio requires matched conditions.
Behavior
Erythritol produces sensory cooling during dissolution. Solubility and crystallization behavior in pharmaceutical carriers provide qualitative material comparisons; finished-food predictions need a matching matrix, concentration, particle profile and thermal history.
Working with it
Check the actual product purity and moisture and evaluate texture through the intended heating and cooling cycle.
Formula basis
The 5.3°C crystallization temperature has unresolved material and test conditions. Keep it out of formula calculations; establish a freezing-point coefficient with food-system data beyond molecular mass or cooling sensation.
Analytical and phase basis
Keep loss on drying, water determination and erythritol assay as separate analytical fields with their methods. Track the fraction dissolved at the temperature of interest; sensory cooling during dissolution and crystallization describe different effects from equilibrium freezing-point depression.
POD and freezing data
The 60–80 comparative sweetness range lacks matched sensory conditions. A finished-dessert POD and measured PAC are unavailable. Any component model needs actual purity, water and dissolved fraction, with the result identified as calculated.
Xylitol
- Sweetness
100 · protocol unstated
- Solids
Check grade purity and moisture
- Handling
Cooling sensation; test the finished formula
Sweetness basis
Xylitol has comparative sweetness of 100 under unspecified conditions. Equivalent recipe performance requires a comparison under matched conditions.
Behavior
Xylitol dissolution produces a cooling impression. The formula determines the size of the effect in food.
Working with it
Use the actual food-grade specification and evaluate the intended concentration and texture. A liquid counterpart requires a separate product specification.
Formula basis
Establish a numerical freezing comparison, mixing protocol and any 1:1 substitution on a common formula basis.
Specification and method
Xylitol conforming to JECFA specifications (1996; metals revision 2001) has assay limits of 98.5–101.0% on an anhydrous basis and water ≤0.5% by Karl Fischer. Gas-chromatographic assay corrects the as-is result using measured water. The water maximum implies at least 99.5 g non-water material per 100 g, as a calculated boundary.
POD and freezing data
Xylitol’s sucrose-relative sweetness of 100 has an unspecified mass-versus-molar basis, concentration, temperature and sensory protocol. A one-for-one recipe substitution requires matched conditions. A finished-dessert POD and measured PAC are unavailable; preserve actual purity and dissolved fraction in any declared model.